G and H-Series
Apollo 11, 12, 13, 14
Left photo courtesy Kipp Teague’s Project Apollo Archive
Right photo courtesy Mr. Paul Fjeld
J-Series
Apollo 15, 16, 17
Apollo 16 LM “Orion”, Quad III before deployment | One bay open on “Orion’s” Quad III | Apollo 17 LM “Challenger” with Quad III external thermal blankets opened |
In order to maximize the amount of payload carried to the lunar surface, the J-Series LMs of Apollo’s 15, 16, & 17 packed all of the LM descent stage quads with equipment.ย Quad III contained an LRV pallet, and a “payload pallet” which was different on each mission.
J-Series Payload Pallets
Mission | 15 | 16 | 17 |
Pallet | LR3 | FUVC | LSP Explosives |
Apollo 17 payload pallet, with LSP explosives | Apollo 17 payload pallet after equipment removal | Itemized list of LM descent stage contents for Apollo 16 | Great diagram of Apollo 15 Quad III pallets Compare to diagram at right Diagram courtesy Mr. Glenn Johnson | LRV Aft chassis pallet and lunar hand tool carrier – these comprised the Quad III LRV pallet |
Above: LRV 1 photo clearly shows how LRV pallet was mounted to rear of
the vehicle before the carrying handles were removed. Right photo is
close-up. Compare to photo at left below – top of pallet as seen in the
bay is to the left in photo above, as pallet was mounted vertically in the
LM and horizontally on the LRV
Following 2 sections are exclusive content to
My Little Space Museum
LM 10, Apollo 15 “Falcon” Quad III photos
Note the SHe and Ambient Helium Tanks behind the LRV pallet
This was before installation of the LR3
Deployment test photos for Quad III